Fire damage in Bellevue? Call 206-621-7774 at any hour. We board up openings, remove the water left by firefighting, clean smoke and soot, and pack out and store your belongings, and we document the loss for your insurer as we go. The City does not allow access to a fire-damaged building until the fire investigation is complete, so the steps below start with that.
Fire Damage Restoration in Bellevue, WA
We work across Bellevue and the Eastside from the first night through cleanup, and keep the record your adjuster needs.
Emergency board-up
Broken windows, doors and other openings are boarded up so rain and break-ins do not add to the loss.
Water from firefighting
Hose and sprinkler water is extracted, and the walls, floors and ceilings are dried. See our Bellevue water damage page.
Smoke and soot cleaning
Walls, ceilings, floors and contents are cleaned of soot, including rooms the fire never reached. More on smoke damage restoration.
Contents pack-out and storage
Furniture and belongings are packed out, cleaned and stored while the property is repaired. See contents cleaning and storage.
Hidden moisture checks
Thermal imaging and moisture meters find the water behind walls and under floors that you cannot see.
Insurance documentation
The damage is written up room by room, with photos, in the form your adjuster needs. Our insurance page explains how we work with carriers.


Before Anyone Goes Back In
Bellevue has its own process for a fire-damaged building. These steps come from the City’s Damage Assessment Form.
Wait for the fire investigation
Access to the building is not permitted until the fire investigation is complete. The Bellevue Fire Department can tell you where it stands at 425-452-6892.
Get the Fire Department’s release
A building damaged by fire needs the Fire Department’s release before the City will carry out a damage assessment.
Book the free damage assessment
A City building inspector assesses the damage at no charge. Call Development Services at 425-452-4570 to schedule it.
Find out which permit applies
With minor or no structural damage, the City issues a building permit without plans. With moderate or extensive structural damage, plans go through full plan review before a permit is issued.
Permit the electrical work
Bellevue requires an electrical permit for adding or moving circuits and for changes to the service panel. Applications go through MyBuildingPermit.com, and the work is inspected.
Board-up, drying and cleaning can start once the building is released. The room-by-room record we keep is what your adjuster and your repair contractor work from.
What Bellevue’s Buildings Mean for a Fire
Two facts about Bellevue’s housing shape most of the fire losses here.
Half of Bellevue’s homes share a building
Bellevue had about 65,900 housing units in 2022, and half of them were in multi-family buildings, up from 41% in 2000 (2022 Housing Needs Assessment). In a shared building, smoke and the water used to put a fire out reach units the fire never touched.
The Bellevue Fire Department’s 2023 annual report counts 158 structure fires that year and 18 fire incidents in high-rise buildings. Two three-alarm apartment fires in Crossroads that August destroyed 18 and 20 units and displaced about 50 and 60 residents.
If you own a condo, Washington’s Insurance Commissioner explains that the association’s master policy and your own unit policy work together, and that how much of your interior the association covers depends on the community’s governing documents. If you are not sure, ask the association president or the property manager.
Many houses date from the 1960s and 1970s
Nearly half of Bellevue’s single-family homes were built between 1960 and 1979, according to the same assessment.
Those years overlap the period when aluminum branch wiring was installed. The U.S. Consumer Product Safety Commission dates aluminum wiring in new homes to 1965 through the mid-1970s, and says homes built before 1972 and wired with aluminum are 55 times more likely to have one or more connections reach fire hazard conditions than homes wired with copper (CPSC publication 516).
If your fire started at an outlet or a switch in a house of that age, ask the electrician who inspects it to check the wiring type.
What to Do Before We Arrive
The City of Bellevue’s fire guidance covers the basics.
- Do not go back in until the building has been deemed safe.
- Do not turn the utilities back on yourself. Contact your utility provider.
- Contact your insurance company, and keep every receipt for fire-related spending.
- Make an inventory of damaged property and belongings.
- Notify your mortgage company.
Two things we would add. Photograph every room before anything is moved or thrown out. And if a window, a door or part of the roof is open, tell us when you call, so board-up comes first. Our house fire checklist covers the first 72 hours, and our fire damage restoration guide covers the rest of the process.
Your Insurer Has a Deadline Too
Since 18 October 2026, when your policy requires you to protect the property after a loss, a Washington insurer has five business days to approve the mitigation scope it receives or to send you an approved one (WAC 284-30-330). The rule covers any loss, fire included. We explain how to use it in Washington’s new claim rules.
Bellevue Fire Damage Questions
How soon can cleanup start after a fire in Bellevue?
As soon as the building is released. The City does not allow access until the fire investigation is complete, and the Bellevue Fire Department gives the status at 425-452-6892. We answer the phone 24 hours a day, so call once you are safe and we will be ready when the release comes.
Do I need a permit to repair fire damage in Bellevue?
It depends on the damage. A City building inspector assesses it at no charge. Minor or no structural damage gets a building permit without plans, and moderate or extensive structural damage needs plans and full plan review first (Damage Assessment Form). Electrical changes need their own permit.
My condo or apartment was not the one that burned. Should I still call my insurer?
Yes, it is worth reporting. Smoke and firefighting water travel between units. For condo owners, Washington’s Insurance Commissioner explains that the association’s master policy and your unit policy work in tandem, and that which one covers your interior finishes depends on the governing documents.
Does homeowners insurance cover fire damage?
Usually, within limits. Washington’s Insurance Commissioner points out that a fire payout is based on the cost to repair or rebuild, not on market value; that additional living expense pays only the extra cost of living elsewhere; that upgrades to meet current code usually need an ordinance-or-law endorsement; and that the deductible is almost never waived.
Can I clean up smoke damage myself?
Washington’s Department of Health suggests considering a contractor when ash covers most indoor surfaces, and having suspected asbestos tested before anyone disturbs it. Check with your insurer before you clean or throw anything out.
Rated 4.7 out of 5 on Google (45 reviews). Read our Google reviews.
Fire Damage in Bellevue? Call Any Hour
We answer 24 hours a day, every day of the year. Eastside line: 425-462-7774.
Call 206-621-7774Request an EstimateBellevue Neighborhoods & Surrounding Areas We Serve
Bellevue runs from the downtown high-rises and the apartment blocks of Crossroads and BelRed to the hillside homes of Somerset, Newport Hills and Bridle Trails. We dispatch to all of them and to the neighboring Eastside cities.
Inside Bellevue
